Coilover Air Cup Kit Set of 4 Cups (Front & Rear)
Details
Coilover Air Cup Kit Set of 4 Cups (Front & Rear)
Imported from Europe, this is a new, much more affordable air cup suspension kit on the market! A perfect combination between airride and coilovers. With air cup suspension you keep the ride quality and performance of your coilovers and have the ability to raise your car with the push of a button. A great system for show, track, drift or daily driven cars. Anything from a Honda Civic, to a Ferrari F40 can utilize this product.
Product Description
This kit includes:
• 2 billet aluminum air cups, 8mm air line fittings
• 10 meters 8mm airline
• 2 billet cup washers
2 year warranty on the air cups.
We strongly recommend to use the following valve to operate the air cups: 3-way valve.
How does it work?
The air cup is mounted on the top of the spring and replaces the top hat which is originally mounted on the spring. When you put pressure on the air cups the car will raise 50mm. Air cup suspension is a perfect system to drive your (extremely) lowered car across obstacles without any risk of ground contact. The air cup lift system does not affect the ride quality and performance of your coilovers. It is not intended to act as "air suspension" or be driven at full height for long distances*
Dimensions
The air cups will take up a certain space depending on the vehicle. The air cup takes only 18mm of space in the lowest position, often less than your original top hat (in many cases around 20mm). At best, you win some space when installing the air cups. In some cases you should assemble one or more spacers (which are supplied with your order). This will take up around 6 to 12 mm in height (see the manual). The diameter of the air cup is 110 mm.
Coilover requirements
The air cups will fit any brand coilovers, as long as they meet the requirements. Make sure the dimensions shown on the images match your coilover, we strongly recommend to measure with a caliper. If your coilovers have other dimensions, please contact us.
• The outside diameter of the spring must be less than 89mm (max. of 95mm on request).
• The inside diameter of the spring must be more than 61 mm.
• Available for 5 different coilover shaft diameters: 12,5mm, 14mm, 15mm, 20mm and 22mm. Custom diameters on request. Please measure your shaft diameter prior to inquiry**
Imported from Europe, this is a new, much more affordable air cup suspension kit on the market! A perfect combination between airride and coilovers. With air cup suspension you keep the ride quality and performance of your coilovers and have the ability to raise your car with the push of a button. A great system for show, track, drift or daily driven cars. Anything from a Honda Civic, to a Ferrari F40 can utilize this product.
Product Description
This kit includes:
• 2 billet aluminum air cups, 8mm air line fittings
• 10 meters 8mm airline
• 2 billet cup washers
2 year warranty on the air cups.
We strongly recommend to use the following valve to operate the air cups: 3-way valve.
How does it work?
The air cup is mounted on the top of the spring and replaces the top hat which is originally mounted on the spring. When you put pressure on the air cups the car will raise 50mm. Air cup suspension is a perfect system to drive your (extremely) lowered car across obstacles without any risk of ground contact. The air cup lift system does not affect the ride quality and performance of your coilovers. It is not intended to act as "air suspension" or be driven at full height for long distances*
Dimensions
The air cups will take up a certain space depending on the vehicle. The air cup takes only 18mm of space in the lowest position, often less than your original top hat (in many cases around 20mm). At best, you win some space when installing the air cups. In some cases you should assemble one or more spacers (which are supplied with your order). This will take up around 6 to 12 mm in height (see the manual). The diameter of the air cup is 110 mm.
Coilover requirements
The air cups will fit any brand coilovers, as long as they meet the requirements. Make sure the dimensions shown on the images match your coilover, we strongly recommend to measure with a caliper. If your coilovers have other dimensions, please contact us.
• The outside diameter of the spring must be less than 89mm (max. of 95mm on request).
• The inside diameter of the spring must be more than 61 mm.
• Available for 5 different coilover shaft diameters: 12,5mm, 14mm, 15mm, 20mm and 22mm. Custom diameters on request. Please measure your shaft diameter prior to inquiry**
